Working on a roof, safe for everyone
![Installed maintenance guardrail prior to the installation of the green roof, which then provides the necessary ballast. Flat roof with guardrail](/sites/default/files/styles/max_325x325/public/2019-04/asg2.jpg?itok=r6Fer2mO)
Installed maintenance guardrail prior to the installation of the green roof, which then provides the necessary ballast.
![Collective protection: with the Maintenance Guardrail Fallnet® ASG, the roof as a workplace is safe for everyone, whether they are carrying out maintenance work or servicing technical equipment. Vegetated roof with guardrail](/sites/default/files/styles/max_325x325/public/2019-04/asg3.jpg?itok=9BNrgbt6)
Collective protection: with the Maintenance Guardrail Fallnet® ASG, the roof as a workplace is safe for everyone, whether they are carrying out maintenance work or servicing technical equipment.
![The inclined Maintenance Guardrail Fallnet® ASG lends the roof edge a pleasing look. Building with a guardrail on the rooftop](/sites/default/files/styles/max_325x325/public/2019-04/asg1_0.jpg?itok=StF1oVVQ)
The inclined Maintenance Guardrail Fallnet® ASG lends the roof edge a pleasing look.
Maintenance Guardrail Fallnet® ASG
A workplace at height on a roof should provide not only a wonderful view but above all safety, as no-one should be able to fall off it.
Everything is fine during the construction phase of the building as the scaffolding provides protection for all works. However, once the scaffolding has been removed, proper fall protection measures have to be implemented for all subsequent works on the roof. Every flat roof has to be accessed for maintenance purposes, even if the roof is only covered in gravel.
Given that a flat roof justifiably and happily enjoys considerable status as an area that is put to meaningful use, there is a lot going on up there!
It may be a green roof that has to be accessed once or twice a year for maintenance purposes, which, as it happens, is not more frequent than a gravel roof. In addition, roofs are now often used for the installation of ventilation, air-conditioning, photovoltaic or transmission equipment, which automatically means maintenance work. In this way, the roof becomes a workplace (for the inexperienced too) involving occupational safety measures.
Experience shows that, in practice, single anchor points are hardly ever used for fall arrest systems and that the trend, therefore, is clearly towards collective protection systems. With its new Maintenance Guardrail Fallnet® ASG, ZinCo is offering permanent protection for everyone. The maintenance guardrail made of aluminium is easily and quickly installed and does not require roof penetration.
Installation involves laying the upright posts of the railing structure onto the protective layer at intervals of max. 2.60 m. Once the railing posts have been folded out, the railing tubes are fitted to them. Corner brackets are used to fix the railing over corners, where applicable. The ballast load from the subsequent green roof build-up (drainage, substrate and plant layers) holds the railing in place, as required. The weight of a “normal” extensive green roof is generally sufficient (80 kg/m² dry weight) in this case. The system can be easily adapted to suit the roof conditions. The special feature of the Maintenance Guardrail Fallnet® ASG is that it can be installed in a vertical position or sloped at an angle of 67.5 °, without going below the required minimum railing height of 1.00 m. This inclined position creates a visually pleasing roof finish. Depending on the viewing angle, the railing may not be visible from below, a clear advantage for the aesthetics of the building.
The Maintenance Guardrail Fallnet® ASG which has been tested and certified by Dekra, therefore, offers life-saving safety, at all times and for everyone on the roof.
For further information, please contact:
ZinCo Green Roof Systems Ltd.
Wittas House, 2 Rivers Industrial Estate,
Station Lane, Witney, OX28 4BH
Telephone: +44 1993 229700
e-mail: office@zinco-greenroof.co.uk